← Back to OBD2 List
Opel / Vauxhall
🟡 Medium
Opel / Vauxhall
P0302
OPEL P0302 Cylinder 2 Misfire Detected
The P0302 diagnostic trouble code indicates a malfunction in the Cylinder 2 Misfire Detected. Frequently encountered in Opel/Vauxhall models, often due to failed coil pack on cylinder 2. This is a well-documented issue for opel vehicles equipped with Ecotec, CDTI technology. It typically triggers the MIL (Malfunction Indicator Lamp) and may affect overall engine efficiency and emission levels.
Brand
Opel / Vauxhall
Fault Code
P0302
Severity
🟡 Medium
Models
Astra, Corsa, Insignia, Zafira, Meriva, Vectra, Mokka
🛠️ Diagnostic Overview
Difficulty Level
🛠️🛠️
Medium (Moderate)
Estimated Time
⏱️ 1-2 Hours
🧰 Required Tools
- ✓ Digital Multimeter
- ✓ OBD2 Diagnostic Scanner
- ✓ Socket Wrench & Hand Tools
- ✓ Electrical Contact Cleaner Spray
⚠️ Possible Causes
- Failed coil pack on cylinder 2
- Faulty signal from the respective sensor module
- Corrosion or physical damage to the wiring harness
- Internal mechanical wear within the system components of the opel powertrain.
🔧 Recommended Fixes
- Begin by checking the sensor's real-time data using an OBD2 diagnostic tool. Inspect the associated wiring for any signs of fraying or loose connections. Clean the affected components if applicable, or replace them with high-quality OEM parts approved for opel. Reset the fault codes and perform a drive cycle to verify the repair.
🚗 Commonly Affected Vehicles
🏭 Opel / Vauxhall – Other Common Fault Codes