Bmw 40i (333 Hp) Mild Hybrid xDrive Steptronic
General information
| Power | 335 Hp @ 5500-6500 rpm. |
|---|---|
| Torque | 449 Nm @ 1500-5200 rpm. |
| Maximum speed | 210 km/h, Electronically limited |
| Brand |
BMW
|
|---|---|
| Model |
X6
|
| Generation |
X6 (G06)
|
| Modification (Engine) |
40i (335 Hp) Mild Hybrid sDrive Steptronic
|
| Start of production |
2020 year
|
| End of production |
2021 year
|
| Powertrain Architecture |
MHEV (Mild Hybrid Electric Vehicle, power-assist hybrid, battery-assisted hybrid vehicles, BAHV)
Powertrain architecture classifies the propulsion technology of the vehicle, such as internal combustion, electric (BEV), or hybrid.
|
| Body type |
SAC
Body type refers to the structural design and shape of the vehicle (such as Sedan, Hatchback, SUV, or Coupe).
|
| Seats |
5
Seat count specifies the maximum passenger capacity the vehicle is legally approved to transport at once.
|
| Doors |
5
Door count indicates the total number of entry points for passengers and cargo access (e.g., 3-door, 5-door).
|
FAQ
Performance specs
| Fuel consumption economy urban (EPA) |
11.2 l/100 km
|
|---|---|
| Fuel consumption economy extra urban (EPA) |
9 l/100 km
|
| Fuel consumption economy combined (EPA) |
10.2 l/100 km
|
| Fuel Type |
Petrol (Gasoline)
Fuel type defines the primary source of energy required by the vehicle’s engine (petrol, diesel, electricity, hybrid, LPG, etc.).
|
| Acceleration 0 - 60 mph |
5.3 sec
|
| Maximum speed |
210 km/h, Electronically limited
Maximum speed represents the upper limit of velocity the vehicle can reach, limited by gear ratios, engine power, and aerodynamic resistance.
|
| Weight-to-power ratio |
6.4 kg/Hp, 155.2 Hp/tonne
|
| Weight-to-torque ratio |
4.8 kg/Nm, 208.1 Nm/tonne
|
Electric cars and hybrids specs
| Battery Voltage |
48 V
|
|---|---|
| Battery technology |
Lithium-ion (Li-Ion)
|
| Electric motor power |
11 Hp
|
| Electric motor location |
Front, Longitudinal
|
Internal combustion engine specs
| Power |
335 Hp @ 5500-6500 rpm.
|
|---|---|
| Power per litre |
111.7 Hp/l
Power per litre (specific power) measures the engine power relative to its displacement. A higher value indicates advanced efficiency and engineering quality.
|
| Torque |
449 Nm @ 1500-5200 rpm.
Torque represents the engine’s rotational force, which determines pulling power. High torque ensures responsive acceleration and stronger uphill performance.
|
| Engine layout |
Front, Longitudinal
Engine layout defines the position and alignment of the engine block. This layout affects the car’s weight distribution, handling, and interior cabin space.
|
| Engine Model Code |
B58B30M1
|
| Engine displacement |
2998 cm3
Engine displacement represents the combined volume of all cylinders. It is a direct indicator of engine size and baseline performance potential.
|
| Number of cylinders |
6
Cylinder count represents the number of combustion chambers. More cylinders generally result in smoother operation and a refined engine note.
|
| Engine configuration |
Inline
|
| Cylinder bore |
82 mm
|
| Piston stroke |
94.6 mm
|
| Compression ratio |
11:1
|
| Number of valves per cylinder |
4
Valves per cylinder control the airflow into and exhaust out of the engine. More valves improve high-RPM breathing and performance.
|
| Fuel injection system |
Direct injection
|
| Engine aspiration |
Twin-power turbo, Intercooler
Aspiration describes how the engine draws air into its cylinders, distinguishing naturally aspirated setups from turbochargers or superchargers.
|
| Valvetrain |
VALVETRONIC, Double-VANOS
|
| Engine oil capacity |
6.5 l
|
| Engine systems |
Start & Stop System
|
Space, Volume and weights
| Kerb Weight |
2158 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
|
|---|---|
| Max. weight |
2782 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
|
| Max. load |
624 kg
|
| Trunk (boot) space - minimum |
580 l
|
| Trunk (boot) space - maximum |
1530 l
|
| Fuel tank capacity |
83 l
|
| Max. roof load |
100 kg
|
| Permitted trailer load with brakes (12%) |
3270 kg
|
| Permitted trailer load without brakes |
750 kg
|
Dimensions
| Length |
4947 mm
|
|---|---|
| Width |
2004 mm
|
| Width including mirrors |
2212 mm
|
| Height |
1685 mm
|
| Wheelbase |
2975 mm
|
| Front overhang |
890 mm
|
| Rear overhang |
1082 mm
|
| Minimum turning circle (turning diameter) |
12.6 m
|
Drivetrain, brakes and suspension specs
| Drivetrain Architecture |
The Internal combustion engine (ICE) and electric motor drive the rear wheels of the car with the ability to work only in mixed mode.
Drivetrain type specifies which wheels receive power from the engine. This affects road grip, cornering, and stability on slippery surfaces.
|
|---|---|
| Drive wheel |
Rear wheel drive
Drivetrain type specifies which wheels receive power from the engine. This affects road grip, cornering, and stability on slippery surfaces.
|
| Number of gears and type of gearbox |
8 gears, automatic transmission Steptronic
|
| Front suspension |
Coil spring, Double wishbone, Transverse stabilizer, Air Suspension - Optional
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
|
| Rear suspension |
Independent multi-link spring suspension with stabilizer, Air Suspension - Optional
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
|
| Front brakes |
Ventilated discs
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
|
| Rear brakes |
Ventilated discs
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
|
| Assisting systems |
ABS (Anti-lock braking system)
|
| Steering type |
Steering rack and pinion
|
| Power steering |
Electric Steering
|
| Tires size |
Front wheel tires: 275/45 R20; 275/40 R21; 275/35 R22Rear wheel tires: 275/45 R20; 315/35 R21; 315/30 R22
Tire size specifies the tread width, aspect ratio, and rim diameter, affecting the balance between handling grip and ride comfort.
|
| Wheel rims size |
Front wheel rims: 9J x 20; 9.5J x 21; 9.5J x 22Rear wheel rims: 9J x 20; 10J x 21; 10.5J x 22
|
Common OBD2 Fault Codes
Similar Models
User Reviews
O
Oscar M.
23 months ago
★★★★★
Ordered it immediately after a quick test drive. The 335 Hp @ 5500-6500 rpm. hp feels powerful on the road. Sound insulation is great, very quiet cabin at high speeds. Worth every single penny spent.
•
H
Henry A.
19 months ago
★★★★★
Switched from a different brand. Engine performance exceeded my expectations. Suspension handles bumps and rough roads very smoothly. I highly recommend it, won't disappoint.
•
H
Harry S.
3 weeks ago
★★★★★
Just picked mine up last week! The engine is snappy, great response time. The handling in corners is very safe. Value for money is unmatched, highly recommended.
•