Brands Compare VIN Decoder OBD2 Blog
🇬🇧 English 🇹🇷 Türkçe 🇩🇪 Deutsch 🇫🇷 Français 🇪🇸 Español 🇮🇹 Italiano

Bmw 128i (230 Hp)

General information
Photo of 2008 - 2011 Bmw 128i (230 Hp) Cabriolet (230 Hp) - technical specs and dimensions
Power 230 Hp @ 6500 rpm.
Torque 270 Nm @ 2750 rpm.
Acceleration 0 - 100 km/h 7.3 sec
Maximum speed 210 km/h, Electronically limited
Brand
BMW
Model
1 Series
Generation
1 Series Convertible (E88)
Modification (Engine)
128i (230 Hp) Steptronic
Start of production
2008 year
End of production
2011 year
Powertrain Architecture
Internal Combustion engine
Powertrain architecture classifies the propulsion technology of the vehicle, such as internal combustion, electric (BEV), or hybrid.
Body type
Cabriolet
Body type refers to the structural design and shape of the vehicle (such as Sedan, Hatchback, SUV, or Coupe).
Seats
4
Seat count specifies the maximum passenger capacity the vehicle is legally approved to transport at once.
Doors
2
Door count indicates the total number of entry points for passengers and cargo access (e.g., 3-door, 5-door).

Bmw 1 Series Review

The Bmw 1 Series 1 Series Hatchback 5dr (E87 LCI, facelift 2007) (128i (230 Hp)) is a Cabriolet vehicle that entered production in 2008. Under the hood, it features a 2996 cm3 engine that pushes out 230 Hp @ 6500 rpm.. Drivers can expect a 0-100 km/h acceleration time of 7.3 sec and a maximum speed of 210 km/h, Electronically limited. Technically, the vehicle features a Front, Longitudinal engine placement and is equipped with a 6-cylinder block. It produces a maximum torque of 270 Nm @ 2750 rpm..

Introduced in 2008 - 2011, the Bmw 128i (230 Hp) brings a high level of engineering and build quality to its segment. Technically satisfying, the model responds to driver expectations with its 230 Hp @ 6500 rpm. unit. The maximum velocity reach is approximately 210 km/h, Electronically limited. It demonstrates a steady character and inspires confidence through its handling. In a general assessment, the technical package of the Bmw 128i (230 Hp)** focuses on user satisfaction.
📊 Model Comparison AnalysisThis model has **76 Hp** lower power than 135i (306 Hp) Steptronic, is **1.6 seconds** slower to 100 km/h. This model has **76 Hp** lower power than 135i (306 Hp), is **1.8 seconds** slower to 100 km/h.
FAQ
How many horsepower does Bmw 128i (230 Hp) have? +
The Bmw 128i (230 Hp) model is equipped with an engine producing 230 Hp @ 6500 rpm. total horsepower.
What is the 0-100 km/h acceleration of Bmw 128i (230 Hp)? +
The Bmw 128i (230 Hp) can accelerate from 0 to 100 km/h in just 7.3 sec.
What is the top speed of Bmw 128i (230 Hp)? +
According to technical specs, the maximum speed of the vehicle is 210 km/h, Electronically limited.
What drivetrain does the Bmw 128i (230 Hp) have? +
This model transfers power to the road via a Rear wheel drive drivetrain.
Is the Bmw 128i (230 Hp) a good car? +
Considering the technical specs and market position, the Bmw 128i (230 Hp) is a highly competitive and desirable model in its class.
Is Bmw 128i (230 Hp) reliable? +
The Bmw 128i (230 Hp) is built with high engineering standards and is generally considered a reliable vehicle with proper maintenance.
Performance specs
Fuel consumption economy urban (EPA)
13.1 l/100 km
Fuel consumption economy extra urban (EPA)
8.7 l/100 km
Fuel consumption economy combined (EPA)
11.2 l/100 km
Fuel Type
Petrol (Gasoline)
Fuel type defines the primary source of energy required by the vehicle’s engine (petrol, diesel, electricity, hybrid, LPG, etc.).
Acceleration 0 - 100 km/h
7.3 sec
The 0-100 km/h sprint time measures how quickly the vehicle accelerates from a standstill. It is a key indicator of raw performance and responsiveness.
Acceleration 0 - 62 mph
7.3 sec
The 0-100 km/h sprint time measures how quickly the vehicle accelerates from a standstill. It is a key indicator of raw performance and responsiveness.
Acceleration 0 - 60 mph
7 sec
Maximum speed
210 km/h, Electronically limited
Maximum speed represents the upper limit of velocity the vehicle can reach, limited by gear ratios, engine power, and aerodynamic resistance.
Weight-to-power ratio
7 kg/Hp, 142 Hp/tonne
Weight-to-torque ratio
6 kg/Nm, 166.7 Nm/tonne
Engine specs
Power
230 Hp @ 6500 rpm.
Power per litre
76.8 Hp/l
Power per litre (specific power) measures the engine power relative to its displacement. A higher value indicates advanced efficiency and engineering quality.
Torque
270 Nm @ 2750 rpm.
Torque represents the engine’s rotational force, which determines pulling power. High torque ensures responsive acceleration and stronger uphill performance.
Engine layout
Front, Longitudinal
Engine layout defines the position and alignment of the engine block. This layout affects the car’s weight distribution, handling, and interior cabin space.
Engine Model Code
N52B30M1
Engine displacement
2996 cm3
Engine displacement represents the combined volume of all cylinders. It is a direct indicator of engine size and baseline performance potential.
Number of cylinders
6
Cylinder count represents the number of combustion chambers. More cylinders generally result in smoother operation and a refined engine note.
Engine configuration
Inline
Cylinder bore
85 mm
Piston stroke
88 mm
Compression ratio
10.7:1
Number of valves per cylinder
4
Valves per cylinder control the airflow into and exhaust out of the engine. More valves improve high-RPM breathing and performance.
Fuel injection system
Multi-port manifold injection
Engine aspiration
Naturally aspirated engine
Aspiration describes how the engine draws air into its cylinders, distinguishing naturally aspirated setups from turbochargers or superchargers.
Valvetrain
VALVETRONIC, Double-VANOS
Engine oil capacity
6.5 l
Coolant
8.5 l
Space, Volume and weights
Kerb Weight
1620 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
Max. weight
2030 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
Max. load
410 kg
Trunk (boot) space - minimum
260 l
Trunk (boot) space - maximum
305 l
Fuel tank capacity
53 l
Dimensions
Length
4373 mm
Width
1748 mm
Width including mirrors
1934 mm
Height
1411 mm
Wheelbase
2660 mm
Front track
1474-1480 mm
Rear / Back Track
1507-1513 mm
Front overhang
764 mm
Rear overhang
949 mm
Drag coefficient (Cd)
0.34
Minimum turning circle (turning diameter)
10.7 m
Drivetrain, brakes and suspension specs
Drivetrain Architecture
The Internal combustion engine (ICE) drives the rear wheels of the vehicle.
Drivetrain type specifies which wheels receive power from the engine. This affects road grip, cornering, and stability on slippery surfaces.
Drive wheel
Rear wheel drive
Drivetrain type specifies which wheels receive power from the engine. This affects road grip, cornering, and stability on slippery surfaces.
Number of gears and type of gearbox
6 gears, automatic transmission Steptronic
Front suspension
Spring Strut, Transverse stabilizer
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
Rear suspension
Independent multi-link spring suspension with stabilizer
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
Front brakes
Ventilated discs, 300 mm
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
Rear brakes
Ventilated discs, 300 mm
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
Assisting systems
ABS (Anti-lock braking system)
Steering type
Steering rack and pinion
Power steering
Hydraulic Steering
Tires size
Front wheel tires: 205/55 R16; 205/50 R17; 215/40 R18Rear wheel tires: 205/55 R16; 205/50 R17; 225/45 R17; 245/35 R18
Tire size specifies the tread width, aspect ratio, and rim diameter, affecting the balance between handling grip and ride comfort.
Wheel rims size
Front wheel rims: 7J x 16; 7J x 17; 7.5J x 18Rear wheel rims: 7J x 16; 7J x 17; 7.5J x 17; 8.5J x 18
Common OBD2 Fault Codes
4801 🟡 Medium
BMW DSC: Pressure Sensor Failure
Diagnostic Guide
5DE0 🟢 Low
BMW Brake Pad Wear Sensor: Line Fault
Diagnostic Guide
9C69 🟡 Medium
BMW Stratification Potentiometer Fault
Diagnostic Guide
A0B3 🟡 Medium
BMW CAS: Starter Activation Fault
Diagnostic Guide
Similar Models
Bmw 1 Series M135 (317 Hp) xDrive Steptronic DCT
Bmw 1 Series
M135 (317 Hp) xDrive Steptronic DCT
Bmw 1 Series 123 (218 Hp) Mild Hybrid xDrive Steptronic DCT
Bmw 1 Series
123 (218 Hp) Mild Hybrid xDrive Steptronic DCT
Bmw 1 Series 120d (163 Hp) Mild Hybrid Steptronic DCT
Bmw 1 Series
120d (163 Hp) Mild Hybrid Steptronic DCT
Bmw 1 Series 120 (204 Hp) Steptronic DCT
Bmw 1 Series
120 (204 Hp) Steptronic DCT
User Reviews
C
Charlie 92
21 days ago
★★★★★
Just picked mine up last week! The engine is snappy, great response time. Sound insulation is great, very quiet cabin at high speeds. Value for money is unmatched, highly recommended.
•
H
Harry 92
4 months ago
★★★★★
Ordered it immediately after a quick test drive. Very responsive throttle, makes highway overtaking a breeze. Suspension handles bumps and rough roads very smoothly. Value for money is unmatched, highly recommended.
•
O
Oliver 88
17 days ago
★★★★★
Ordered it immediately after a quick test drive. N/A efficiency is surprisingly good for this class. The infotainment is fast and lag-free. Planning to keep it for a long time.
•
J
Jacob 95
6 months ago
★★★★★
Finally got the keys today. The 230 Hp @ 6500 rpm. hp feels more than enough for daily driving. Sound insulation is great, very quiet cabin at high speeds. If you are thinking about buying one, go test drive it.
•

Leave a Review

★ ★ ★ ★ ★