Audi GT 5.2 FSI V10 (560 Hp) quattro R tronic
General information
| Power | 560 Hp @ 8000 rpm. |
|---|---|
| Torque | 540 Nm @ 6500 rpm. |
| Acceleration 0 - 100 km/h | 3.8 sec |
| Maximum speed | 317 km/h |
| Fuel consumption (economy) - combined | 14.2 l/100 km |
| Brand |
Audi
|
|---|---|
| Model |
R8
|
| Generation |
R8 Spyder (42)
|
| Modification (Engine) |
GT 5.2 FSI V10 (560 Hp) quattro R tronic
|
| Start of production |
June, 2011 year
|
| End of production |
October, 2012 year
|
| Powertrain Architecture |
Internal Combustion engine
Powertrain architecture classifies the propulsion technology of the vehicle, such as internal combustion, electric (BEV), or hybrid.
|
| Body type |
Cabriolet
Body type refers to the structural design and shape of the vehicle (such as Sedan, Hatchback, SUV, or Coupe).
|
| Seats |
2
Seat count specifies the maximum passenger capacity the vehicle is legally approved to transport at once.
|
| Doors |
2
Door count indicates the total number of entry points for passengers and cargo access (e.g., 3-door, 5-door).
|
FAQ
Performance specs
| Fuel consumption (economy) - urban |
21.5 l/100 km
Fuel consumption shows how much fuel the car consumes on average per 100 km. Lower figures represent better fuel economy and lower running costs.
|
|---|---|
| Fuel consumption (economy) - extra urban |
10.2 l/100 km
Fuel consumption shows how much fuel the car consumes on average per 100 km. Lower figures represent better fuel economy and lower running costs.
|
| Fuel consumption (economy) - combined |
14.2 l/100 km
Fuel consumption shows how much fuel the car consumes on average per 100 km. Lower figures represent better fuel economy and lower running costs.
|
| CO2 emissions |
332 g/km
|
| Fuel Type |
Petrol (Gasoline)
Fuel type defines the primary source of energy required by the vehicle’s engine (petrol, diesel, electricity, hybrid, LPG, etc.).
|
| Acceleration 0 - 100 km/h |
3.8 sec
The 0-100 km/h sprint time measures how quickly the vehicle accelerates from a standstill. It is a key indicator of raw performance and responsiveness.
|
| Acceleration 0 - 62 mph |
3.8 sec
The 0-100 km/h sprint time measures how quickly the vehicle accelerates from a standstill. It is a key indicator of raw performance and responsiveness.
|
| Acceleration 0 - 60 mph (Calculated by User) |
3.6 sec
|
| Maximum speed |
317 km/h
Maximum speed represents the upper limit of velocity the vehicle can reach, limited by gear ratios, engine power, and aerodynamic resistance.
|
| Emission standard |
Euro 5
|
| Weight-to-power ratio |
2.9 kg/Hp, 341.5 Hp/tonne
|
| Weight-to-torque ratio |
3 kg/Nm, 329.3 Nm/tonne
|
Engine specs
| Power |
560 Hp @ 8000 rpm.
|
|---|---|
| Power per litre |
107.6 Hp/l
Power per litre (specific power) measures the engine power relative to its displacement. A higher value indicates advanced efficiency and engineering quality.
|
| Torque |
540 Nm @ 6500 rpm.
Torque represents the engine’s rotational force, which determines pulling power. High torque ensures responsive acceleration and stronger uphill performance.
|
| Maximum engine speed |
8700 rpm.
|
| Engine layout |
Rear, Longitudinal
Engine layout defines the position and alignment of the engine block. This layout affects the car’s weight distribution, handling, and interior cabin space.
|
| Engine Model Code |
CMPA
|
| Engine displacement |
5204 cm3
Engine displacement represents the combined volume of all cylinders. It is a direct indicator of engine size and baseline performance potential.
|
| Number of cylinders |
10
Cylinder count represents the number of combustion chambers. More cylinders generally result in smoother operation and a refined engine note.
|
| Engine configuration |
V-engine
|
| Cylinder bore |
84.5 mm
|
| Piston stroke |
92.8 mm
|
| Compression ratio |
12.5:1
|
| Number of valves per cylinder |
4
Valves per cylinder control the airflow into and exhaust out of the engine. More valves improve high-RPM breathing and performance.
|
| Fuel injection system |
Direct injection
|
| Engine aspiration |
Naturally aspirated engine
Aspiration describes how the engine draws air into its cylinders, distinguishing naturally aspirated setups from turbochargers or superchargers.
|
| Valvetrain |
DOHC
|
| Engine oil capacity |
8.3 l
|
| Coolant |
25 l
|
Space, Volume and weights
| Kerb Weight |
1640 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
|
|---|---|
| Max. weight |
1940 kg
Curb weight is a key parameter affecting fuel consumption, handling agility, acceleration times, and stopping distances.
|
| Max. load |
300 kg
|
| Trunk (boot) space - minimum |
100 l
|
| Fuel tank capacity |
80 l
|
Dimensions
| Length |
4434 mm
|
|---|---|
| Width |
1904 mm
|
| Width including mirrors |
2029 mm
|
| Height |
1244 mm
|
| Wheelbase |
2650 mm
|
| Front track |
1638 mm
|
| Rear / Back Track |
1595 mm
|
| Front overhang |
999 mm
|
| Rear overhang |
785 mm
|
| Drag coefficient (Cd) |
0.37
|
| Minimum turning circle (turning diameter) |
11.8 m
|
Drivetrain, brakes and suspension specs
| Drive wheel |
All wheel drive (4x4)
Drivetrain type specifies which wheels receive power from the engine. This affects road grip, cornering, and stability on slippery surfaces.
|
|---|---|
| Number of gears and type of gearbox |
6 gears, automatic transmission R tronic
|
| Front suspension |
Independent, type McPherson with coil spring and anti-roll bar
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
|
| Rear suspension |
Independent multi-link spring suspension with stabilizer
The suspension system absorbs road bumps, providing cabin comfort and keeping tires firmly planted on the road surface.
|
| Front brakes |
Ventilated discs
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
|
| Rear brakes |
Ventilated discs
The brake system is a vital safety component that uses friction to slow down or bring the vehicle to a complete stop.
|
| Assisting systems |
ABS (Anti-lock braking system)
|
| Steering type |
Steering rack and pinion
|
| Power steering |
Hydraulic Steering
|
| Tires size |
235/35 R19; 295/30 R19
Tire size specifies the tread width, aspect ratio, and rim diameter, affecting the balance between handling grip and ride comfort.
|
| Wheel rims size |
8.5J x 19; 11J x 19
|
Common OBD2 Fault Codes
Similar Models
User Reviews
W
William T.
21 days ago
★★★★★
Just picked mine up last week! The 560 Hp @ 8000 rpm. hp feels powerful on the road. The infotainment is fast and lag-free. Worth every single penny spent.
•
L
Leo X
12 months ago
★★★★★
Does anyone experience any rattles or squeaks over time?
•
T
Thomas A.
3 months ago
★★★★★
Bought a used model in great condition last year. The 560 Hp @ 8000 rpm. hp feels powerful on the road. The handling in corners is very safe. I highly recommend it, won't disappoint.
•